Model JSCO-150T JSCO-300T JSCO-1200T
Chamber Volume (capacity) 150L 300L 1200L
Temperature Heating Type Forced Convection
Range Ambient +100C~2500C
Accurarcy +0.20 C at 1200C (150 Liters Volume)
Uniformity +1.00C at 120C (150 Liters Volume )
Control Main controller Digital PID programmeble controller 10 segment 999 cycle or continuous
Wait off timer  mm:ss/hh:mm/continuous selectable
Sensor Pt100ohm
Safety Device Temperature Hydraulic ove temperature protection safety device
Electrical Electrical leakage breaker
Hepa Filter High Temperature Class 100 HEPA Filter
0.3um Particle Removal 99.993%
Dimensions
W*D*H
Inner 600*500*500 600*500*1000 1000*1000*1200
Outer 810*980*1240 810*980*1640 1210*1485*1940
 Material Internal  Stainless Steel 0.8T Polished (SUS304)
External Steel 1T with epoxy powder coating 
Insulation Mineral wool resistance foamed silicone rubber
Door gasket Temperature resistance doamed silicne rubber
Electrical Requirement 220 VAC or 380 VAC 60Hz
 

Class 100 Hi-Temp. HEPA filtratioon system

     
      High Temp. HEPA Filter enables particle remova 0.3um up to 99.93%
      Protect particle contaminationby ambient air tight sealing.

Precision Temperature Control

     Max. Temp. 2500 C, +0.20C accurarcy and +1.00C uniformity. Digital PID controller enables 0.10C resolution and control
     Over temperature protection, alarm, auto- tuning , temperature calibration

Superb Temperature Uniformity 
    

     Filtered air blow back to front circulates laminar flow
     Two fan heater and unique design for homogeneous temperature fro top to botton
Share